MRV Hell Yeh 250 FPV Racing Quadcopter
November 20, 2015
MRV X-Fighter 250 FPV Racing Quadcopter
November 20, 2015
MRV Next Level 250 FPV Racing Quadcopter
$550 $499
Skill Level: Expert
Flight Time: 5 minutes
Control Dist: 1000 metres
The MRV Next Level is a custom built BNF 250 class FPV Racing Drone for serious FPV flying and racing. This setup provides for higher specification components and a top level build quality.
In stock (can be backordered)
BNF 2.4 GHz 4 Ch RC Racing Quadcopter with 5.8GHz First Person View
The MRV Next Level is a custom built FPV Quadcopter for serious FPV flying and racing. This setup provides for higher specification components and a top level build quality. A super strong 3K twill Carbon Fibre frame with 4mm replaceable arms, bullet connectors, directional ultra-bright LEDs and aluminium stand offs. This frame is fitted with high quality, almost indestructible 2204 – 2300kV Motors, 12-20A programmable ESCs and a 800TVL Sony CCD HD FPV Camera. Due to the longer range available with this model it comes with a GPS tracker unit for long range flights that allows you to find your quadcopter using your smartphone.
The FPV package includes a 16-32 channel video transmitter and 16-32 channel receiver and a larger 18cm FPV LCD Screen. This frame is carefully assembled with key components selected for serious FPV pilots who want a strong, reliable and highly durable FPV quadcopter finely matched to high speed flying or racing.
All you need is a Radio Transmitter and Li-Po batteries and you are ready to fly and race FPV Quadcopters.
Features
- First Person View over 5.8GHz
- Real-time video transmission to included LCD screen
- 6 Axis gyro stablised flying and hovering
- LED navigation lights
- 3K twill Carbon Fibre Chassis
Specifications
- OpenPilot CC3D or Naze32 Flight Controller
- SunnySky, Emax or Swarm 2204 – 2300kV Motors
- RCX, ZTW, DYS or Emax 12A/16A/20A ESCs (SimonK or BLHeli Flashed)
- Gemfan 5040/5045 Nylon or Carbon Fibre Propellers
FPV Gear
- 18cm FPV LCD Screen
- 700TVL Super HAD CMOS FPV Camera
- 2.8mm Wide Angle Lens
- 25mw Video Transmitter
- 32 Channel Video Receiver
- Cloverleaf and Dipole Antennas
Extras
- Mobius/GoPro Camera Mounting Plate with Anti Vibration Mounts
- 12V Voltage Regulator (if required)
- LC Filter (reduces noise in video feed)
- XT60 Lipo Connector
- ESC bullet Connectors
- Super Tough Nylon Lipo Strap
- Low Voltage Alarm
You Will Need
- 1300-2200 mAh 3S Lipo Battery (XT60 Connector)
- 500-1000 mAh 2/3S Lipo Battery (JST Connector)
- 6CH Radio Transmitter/Receiver
- FPV Goggles for Full Immersion Flying
PLEASE NOTE: The Multirotorverse series of drones are a custom build. Each one is assembled and tuned to the customers requirements and delivered tuned, tested and ready to bind’n’fly. Delivery of the MRV FPV Racers usually takes 2-3 weeks.
| Weight | 1 kg |
|---|---|
| Dimensions | 52 x 52 x 11.5 mm |
| Colours | Green and Grey, White |
Reviews
You must be logged in to post a review.
Related products
-
Add to basketMRV X-Fighter 250 FPV Racing Quadcopter
$400$369Skill Level: Expert
Flight Time: 5 minutes
Control Dist: 500 metresThe MRV X-Fighter is a BNF 250 class FPV Racing Drone and is the ideal first FPV racing drone for those entering the sport. It has a tough nylon polyamide integrated frame with a glass fibre cage.
-
Add to basketMRV Hell Yeh 250 FPV Racing Quadcopter
$450$399Skill Level: Expert
Flight Time: 5 minutes
Control Dist: 700 metresThe MRV Hell Yeh is a BNF 250 class FPV Racing Drone tuned for high speed flying or racing. Built on a 3K weave Carbon Fibre frame, it includes an 8ch FPV Video Tx and Rx and an 11cm LCD Screen.
-
Add to basketSpecktrum DX6i Radio Controller
$299The Spektrum DX6i is a 6Ch full range radio controller. Featuring the AR600 DSMX 6 channel receiver it can be extensively programmed.
Bob –
Built for the experienced pilot, this drone is made for racing, fast and agile and not for the unskilled.