iFlight TITAN XL5 DJI Digital FPV Air Unit GPS

iFlight TITAN XL5 with Caddx Polar Starlight Cam

August 12, 2021

NEW

iFlight ProTek35 with Caddx Polar Vista Cam

August 13, 2021

iflight-chimera5-hd-lr-5-inch-gps-drone-nebula-pro-digital-system-bnf

iFlight Chimera5 with Caddx Polar Vista Cam

$649.00 – $2,213.00

+ 5 inch Dead Cat Frame
+ BNF or RTF (DJI Remote & Googles)
+ Caddx Polar Vista Digital HD
+ Long Range Design
+ Beast F7 45A 4-in-1 ESC
+ XING 2005 2550KV Motors
+ GPS Module

Bundle

Clear

SKU: JD163IFLCH5 Categories: FPV Racing, Quadcopters Tags: Caddx Chimera5 FPV FPV Racer iFlight Polar Vista Quadcopter

Description
Additional information

iFlight & Caddx

Introducing our first ultra-light Long Range 5 inch BNF for every terrain and beyond. Our newest Beast F7 AIO on board coupled with our XING 2005 motors. If our iFlight Chimera 4 is too small and light to fight against stronger winds, here you go. Get flight times above 25min using at least Li-On 4S 3000mAh packs. Go crazy and strap a Li-On 4S pack on and go even further, depending on capacity and weight!

GPS Rescue ready for easy recovery in case of signal loss, or even if you’ve been surfing those mountains and suddenly can’t find the way back home.. Betaflight OSD pre-setup GPS elements will show you the way! Custom iFlight 150mm LR antenna for best signal coverage even at long distances.

Outstanding digital FPV experience in 720p directly on your goggles. Custom iFlight 150mm LR antenna for best signal coverage even at long distances.

DJI Digital FPV System

Reimagine Your FPV World

The DJI Digital FPV System was designed for the drone racing industry. It consists of the DJI FPV Air Unit Module, DJI FPV Camera, DJI FPV Goggles, and DJI FPV Remote Controller, all of which are packed with powerful features and serve a significant role in the development of our HD Low Latency FPV system.

Features Overview

No props in the view, and everything you need to bind and fly!
Optimized weight distribution.
Equipped with Beast F7(45A 4-in-1 ESC) Stack
Equipped with Caddx Polar Vista Digital HD FPV System
Buttery-smooth 720p 120fps FPV feed
Pre-tuned with smooth freestyle settings
Full 3K Carbon Fibre airframe with chamfered arms
Equipped with XING 2005 Motors
Weight: 246g without battery

Expected flight times (cruising, no freestyle, average speed):

Recommended battery: 4S 1300mAh and above!

Without GoPro: 11-13min // 4S 1300mAh, 14-15min // 4S 3000mAh Lion pack, 22-24min

With naked GoPro: 4S 1300mAh, 12-13min // 4S 3000mAh Lion pack, 20-22min

With full GoPro Hero8: 4S 1300mAh, 4-6min

ULTIMATE RANGE with full GoPro: 4S 4000mAh, 13-16min (iFlight FULLSEND INR21700, iFlight 5V BEC instead of GoPro battery)

CAUTION: Flying LIPOs like 850mAh and below might exceed your battery’s max power output on high throttle, might overheat the battery cells and shorten the battery lifespan drastically. Please fly with care!

CAUTION: Li-ion battery packs offer longer flight times (more capacity with less battery weight) but don’t have as much current output as LiPo batteries and tend to get hot if overloaded! Please read the specs and stay within limits!

Frame

Weight ：145g
Wheelbase: 219mm
Main body dimension: 135 x 173mm
Bottom to top distance: 28mm
Arm thickness: 4mm
Bottom plate thickness: 2mm
Top plate thickness: 2mm
Camera plate thickness: 2mm

Electronics

Beast F7 AIO Flight Controller

Specification:

MCU: BGA-STM32F745
Gyro: MPU6000
Blackbox: 16Mb Onboard Flash
BEC output: 5V 2.5A
Barometer: DPS310
Connector: Micro-USB
OSD: AT7456E
FC Firmware：IFLIGHT_F745_AIO
Mounting pattern: 25.5*25.5mm φ3mm
Dimensions: 32.5*32.5mm
Weight: 8.5g

45A 2-6S ESC

Specification:

Uarts: 5
Current Sensor: Yes
Input: 2-6S LIPO
Current scale: 200
Constant: 45A / Burst: 50A
BLHeli: BLHeli-S
Telemetry: no
ESC Firmware: BlheliS G-H-30
Mounting pattern: 25.5 x 25.5mm/Φ3mm
Dimensions: 32.5 x 32.5mm

In The Box

1 x Chimera5 Dead Cat Frame

1 x Caddx Polar Vista Digital HD System Kit

2 x Albatross LHCP RP-SMA 5.8g Antenna

1 x Naked GoPro TPU base mount (installed)

1 x Full GoPro TPU base mount

1 x iFlight Li-Po Strap

2 x Nazgul 5030 3 Blade Propeller (Set of 4 – Colour May Vary)

4 x XING 2005 Motor

1 x Beast F7 Flight Controller

1 x SucceX BLHeli32 45A 4-in-1 ESC 2-6S

2 x MMCX to RP-SMA Female Adapter Cable

1 x GPS Module

Additional Suggested Parts (not included)

*DJI HD FPV Goggles

*DJI Remote Controller (Mode 2)

Important

The DJI Remote Controller is recommended for beginners since you won’t need to set up another receiver, but it is also optional in this BNF drone because it is NOT required in order to use the FPV system. If you don’t choose to use the DJI Remote Controller, you can choose a receiver option for your transmitter and then bind to your own radio as usual.